err-codes.com

A>RMAN-05019: WARNING: no channel of required type allocated to recover copy of datafile n


sponsored links

Cause: A RECOVER COPY command could not
proceed because incremental backup sets exist on a device type that has not
been allocated.
Action: Use the LIST command to
determine which device type is needed, then allocate a channel of that
type.

Relared Errors:
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command
A>RMAN-05503:
at least one auxiliary channel must be allocated to execute this
command
A>RMAN-05504:
at least two redo log files or groups must be specified for this
command
A>RMAN-05505:
auxiliary filename conversion of `string` exceeds maximum length of

A>RMAN-05506:
error during recursive execution
A>RMAN-05507:
standby controlfile checkpoint (string) is more recent than
duplication

Leave a Reply

A>RMAN-05018: some datafile copies cannot be recovered, aborting the RECOVER command


sponsored links

Cause: This error message can follow one
or more RMAN-5017 or RMAN-5019 error messages.
Action: See RMAN-5017 or RMAN-5019 error
messages documentation for more information.

Relared Errors:
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command
A>RMAN-05503:
at least one auxiliary channel must be allocated to execute this
command
A>RMAN-05504:
at least two redo log files or groups must be specified for this
command
A>RMAN-05505:
auxiliary filename conversion of `string` exceeds maximum length of

A>RMAN-05506:
error during recursive execution

Leave a Reply

A>RMAN-05017: no copy of datafile number found to recover


sponsored links

Cause: A RECOVER COPY command was not
able to proceed because no copy of indicated file was found to recover.
Possible causes include the following:

1. no copy of indicated file exists on disk that satisfy the criteria
specified in the user`s recover operands.


2. copy of indicated datafile exists on disk but no incremental backup was
found to apply to the datafile copy.


Action: One of the following:

1. Use or correct TAG specification to recover a different datafile
copy.


2. Use BACKUP FOR RECOVER OF COPY command to create necessary incremental
backup or copy.


Relared Errors:
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command
A>RMAN-05503:
at least one auxiliary channel must be allocated to execute this
command
A>RMAN-05504:
at least two redo log files or groups must be specified for this
command
A>RMAN-05505:
auxiliary filename conversion of `string` exceeds maximum length of

Leave a Reply

A>RMAN-05016: failover to previous backup


sponsored links

Cause: This is an informational message
to indicate the RMAN could not successfully restore the files using the
specified backups. An attempt was made to restore the datafiles/archivelogs/
controlfile/SPFILE using a previous existing backup.
Action: See accompnaying additional
error messages indicating the cause of the failover.

Relared Errors:
A>RMAN-05017:
no copy of datafile number found to recover
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command
A>RMAN-05503:
at least one auxiliary channel must be allocated to execute this
command
A>RMAN-05504:
at least two redo log files or groups must be specified for this
command

Leave a Reply

A>RMAN-05013: auxiliary control filename string conflicts with a file used by the tar


sponsored links

Cause: RMAN is attempting to use the
specified control filename for TSPITR as a restore destination in the
auxiliary database, but this name is already in use by the target
database.
Action: Set control_files parameter in
the auxiliary instance to a name that does not conflict with a filename in use
by the target database.

Relared Errors:
A>RMAN-05016:
failover to previous backup
A>RMAN-05017:
no copy of datafile number found to recover
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command
A>RMAN-05503:
at least one auxiliary channel must be allocated to execute this
command

Leave a Reply

A>RMAN-05012: trying to start the Oracle instance without parameter files …


sponsored links

Cause: The instance could not be started
because no default parameter file (either PFILE or SPFILE) could be found. The
instance will be started in restricted mode with default parameters.
Action: None - this is an informational
message.

Relared Errors:
A>RMAN-05013:
auxiliary control filename string conflicts with a file used by the
tar
A>RMAN-05016:
failover to previous backup
A>RMAN-05017:
no copy of datafile number found to recover
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database
A>RMAN-05502:
the target database must be mounted when issuing a DUPLICATE
command

Leave a Reply

A>RMAN-05011: auxiliary instance must be in nomount state for TSPITR


sponsored links

Cause: The Auxiliary instance was not in
nomount state.
Action: Open the auxiliary instance in
nomount state.

Relared Errors:
A>RMAN-05012:
trying to start the Oracle instance without parameter files
…
A>RMAN-05013:
auxiliary control filename string conflicts with a file used by the
tar
A>RMAN-05016:
failover to previous backup
A>RMAN-05017:
no copy of datafile number found to recover
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command
A>RMAN-05501:
aborting duplication of target database

Leave a Reply

A>RMAN-05010: target database must be opened in READ WRITE mode for TSPITR


sponsored links

Cause: The target database was not
opened in read write mode.
Action: Open the database in read write
mode.

Relared Errors:
A>RMAN-05011:
auxiliary instance must be in nomount state for TSPITR
A>RMAN-05012:
trying to start the Oracle instance without parameter files
…
A>RMAN-05013:
auxiliary control filename string conflicts with a file used by the
tar
A>RMAN-05016:
failover to previous backup
A>RMAN-05017:
no copy of datafile number found to recover
A>RMAN-05018:
some datafile copies cannot be recovered, aborting the RECOVER
command
A>RMAN-05019:
WARNING: no channel of required type allocated to recover copy of datafile
n
A>RMAN-05020:
cannot specify AUXILIARY DESTIONATION option for normal
recovery
A>RMAN-05021:
this configuration cannot be changed for a BACKUP or STANDBY control
file
A>RMAN-05500:
the auxiliary database must be not mounted when issuing a DUPLICATE
command

Leave a Reply